Is It Hard to Remove Ceramic Tile? Queen Creek Tile Removal



Is it hard to remove ceramic tile? Removing ceramic or stone floor tile is a straightforward job in terms of technical ability but a challenging task in terms of commitment. 

Particularly with older installations, it can be exhausting work. However, since the job is so labor-intensive, doing your removal will save you a significant amount of money.

However, what is challenging is the amount of hazardous dust you can encounter. Tile floor removal is best left to the Queen Creek tile floor removal contractors.


How Do You Remove Ceramic Tile From A Concrete Floor?

If you wish to tackle your tile removal yourself, here are the first steps you would take. It may appear straightforward, yet it quickly becomes tiresome, and you could decide to call Queen Creek professional tile removal contractors halfway through your task.


Decide where to begin

If you have a chipped or broken tile, you can typically start there. There is no ideal place to rip up a tile floor, but loose and broken tiles will make it easier to get started. The same goes for any seams with missing or loose grout.

Take out the first tile

Remove the tile, insert your chisel into the seam at an angle and strike the end with your hammer. It could pop right up or loosen an adjacent tile if you’re lucky. The general procedure is the same if you’re using an air chisel or a chipping hammer-like what your local Queen Creek professional tile removal contractors make full use of.


After you’ve removed the first tile, you’ll be able to decide which direction to remove the floor tile in. It’s usually the most accessible tile to try next if you see an edge or gap that appears to be a perfect match for your chisel. While it might be tempting to give up on a stubborn tile and move on, you’ll be shocked at how easily a sledge and chisel can remove tile once you get an edge started.

Thinset and Adhesive Removal

It may thrill to remove a few tiles from your home’s floor, but you must always care about the substance that holds the tile in place. It can be more difficult to remove old mortar or adhesives than remove the tile itself, but you’ll want to follow the same steps.

Suppose it’s too difficult to manage manually. In that case, you might use an air hammer or an automatic tool which is what Queen Creek professional tile removal contractors use, albeit with dust removal built-in.


Is There Much Cleanup After DIY Tile Removal?

Whatever reason you have for removing your old tile floor, you’ll always have to clean up after yourself. Since tile is one of the messier forms of flooring to remove, a broom and dustpan will not suffice, though they will be useful.

You can remove shards of tile with a short square point shovel, but for smaller debris and residue, you’ll need to buy or hire a shop vac.

You shouldn’t use a regular household vacuum to sweep up this kind of mess, and we suggest getting some tarps or cardboard to lie down first. You will prevent the mess from spreading into other rooms by closing off any areas outside the work zone.

It is here your Queen Creek professional tile removal contractors come into their own as they use tools that include dust removal tubes that pump this into containers outside your home.

To save you countless hours of effort and possibly weeks of cleaning dust, you can Contact Kodiak Tile and Stone or fill in the compact form for a direct reply.

You can check out customer reviews here, ‘SoTellUs,’ and the BBB reviews for more information.

Fill Out Form
Complete form for a fast response