How hard is it to remove tile flooring? Removing floor tiles can be challenging and time-consuming, and the difficulties are typically disguised until the work begins. The tile may be attached to bare cement, a plywood or mason board underlayment, or even a previously built floor, depending on the structure.

If you want to learn more, carry on reading, and you will see why you need to consider Queen Creek, AZ, dust-free tile removal on your next flooring project.

 

What Happens with Tile Removal?

You’ve decided you would like a new floor, and your old tiles must be removed. What steps can you foresee?

Even if you have a loose tile, it is usually stuck to the floor using “thinset.” The tiler will lay the grout for the final touch once the thinset has bonded to the concrete and your tiles.

You can obtain different types of thinset, each one stronger than the last.

• Mortar thinset: Like what they use to lay bricks.
• Fortified: You may find this as the standard thinset and is close to concrete strength.
• Flexbond: Contains polymers that allow movement in the tiles. It helps prevent cracking and possible lifting.

If you have a home with tiles laid before the 80s, you may have an asbestos mix and require Queen Creek dust-free tile removal professionals.

 

How to Remove Tiles in Queen Creek, AZ?

The ease with which the tiles can be removed depends on the previous installation. While your tiles are straightforward, the thinset is a different story. Many people use hammer drills, demolition hammers, and angle grinders with wire brush attachments, but they all produce dust clouds.

Even though Kodiak specializes in dust-free tile removal, we also perform traditional prep work.

1. Seal the room and doorways with plastic drop sheets.
2. Remove all furniture, so the room is empty.
3. Pass dust collection hoses to collection bins outside the home.
4. Wear protective gear, including masks and goggles

 

Dust-Free Tile Removal in Queen Creek

Here are some basic steps of how our skilled tile removal teams deal with your floors.

1. Move larger tile pieces away from the work area
2. Watch as the high-power suction hoses suck up the smallest pieces and dust as they are broken from the floor.
3. Check and change air filters if required

Although it may not appear to be a big deal, if you don’t use vacuums, you’ll be cleaning your house for weeks. Not only does Kodiak employ dust-free tile removal equipment, but we also block any potential returns from entering the work area. These procedures ensure that no dust particles enter your home’s HVAC system.

You may have high-quality tile removal services without having to worry about dust in your home.

Contact Kodiak Tile and Stone, or you can fill in the compact form for a direct reply.

You can check out customer reviews here, ‘SoTellUs,’ and the BBB reviews for more information.