Fixing broken tiles can be a straightforward solution, although it isn’t the best solution. For example, you may have found tiny cracks in one or more tiles, which can be fixed in just a few minutes with epoxy glue.
You can fill in the hole with a toothpick and then paint it so that it looks like the rest of the tiles are not broken.
Here are some steps to fix this, yet it is advisable to call local Gold Canyon dustless tile removal contractors to make your life easier and your floor better.
Step-By-Step Tile Fixing Process
Clean Your Area
Before you mix the epoxy you will use to fix the tile, you should clean the entire surface of the tile. Even though a bit of dust won’t change the finished product, it’s easier to work on a surface that’s been cleaned well. Therefore, you clean the area you will fix with rubbing alcohol and paper towels.
If you want to have your tiles taken out, contact your local Gold Canyon tile removal professionals and ask about dust-free tile removal services.
Filling Cracks In Broken Tile
Epoxy can only fix tiny cracks, which isn’t suitable for fixing a large crack. So once you fill the cracks, use a popsicle stick or something similar to level the epoxy.
Because it’s thick, epoxy usually moves into cracks on its own. This material dries quickly, so do it immediately after mixing the epoxy from the models and tubes.
Removing Excess Epoxy
There is one other tool you will need, which is a scraper. These are typically equipped with an extremely sharp razor blade.
You can remove the excess by scraping the epoxy once it has dried, keeping the blade at a 45° angle. You will then remove the dried epoxy and start the ending process, painting over the epoxy to match the color of your tiles.
Painting The Epoxy
Even though the crack will be fixed, there will be an obvious difference between the ones that haven’t been damaged and the ones you are fixing. Tile removal professionals can help get a floor that looks identical rather than a patchwork of tile cracks.
Tile Fixing Alternatives Instead Of Epoxy
You could use other things instead of epoxies, such as Super Glue or Gorilla Glue. If the cracked tiles have a glaze, fingernail polish can help finish the job.
This makes it easier to make the repaired crack look like it was always there. You will need sandpaper to smooth out the complete area for this fix. Last, instead of epoxy, you might save money by using nail polish.
Get Professional Gold Canyon Dustless Tile Removal To Help
Repairing cracks in broken tiles isn’t hard; however, things will never be the same once you get a broken tile.
The best option is hiring dustless tile removal contractors to replace your tile floors. You can find more information about our floor removal and installation services on our website.
Our results lead to a better-looking home, so Contact Kodiak Tile and Stone, or you can fill in the compact form for a direct reply. You can check out customer reviews here, ‘SoTellUs,’ and the BBB reviews for more information.