Chandler Dust-Free Tile Removal. DIY or Tile Removal Pro?

Chandler Dust-Free Tile Removal

Kodiak Tile and Stone are the number one dust-free tile removal company in your area. As the most critical design component of a structure, a new floor transforms the overall appearance of your home.

A renovation is an option for any homeowner who is unhappy with their current flooring. There’s a lot to know if you want to renovate a floor but don’t want to spend money on deconstruction. You can read this instruction, but you’ll probably opt for the dust-free tile removal professionals in Chandler.


Remove Furniture and Fixtures

If you’re removing tile, you’ll need to remove everything on top of it before you can start tearing up the floor.

Devices and facilities may be affected during the demolition process. To remove toilets and sinks, shut off the water supply, so that flooding does not occur.

If a toilet has been removed, drain any remaining water from the bowl or tank. Finally, before installing the new flooring, remove the bolts, carefully raise the mount, and position it in a secure area.


Chandler Tile Removal Needs a Starting Area

Before you rip up floorboards, you’ll need to have a starting place. It is preferable to start in one corner and walk your way to the opposite side of the room.

Once you’ve selected where to start, don’t forget to put on your protective safety, such as eyewear, gloves, and a face mask. The porcelain tile is gently removed with a chisel and a hammer.

You won’t have to go back to collect large, heavy mounds of tile if you throw away the chipped, broken, and removed tile as you continue with the removal.


Do You Need Thinset Removal to Repair Your Sub Floor?

You would damage the floor or the tile underlay if the tile you didn’t demolish wasn’t directly laid on concrete.

As a result, cracks, chips, and uneven surfaces will need to be tested once the tile has been removed. You cannot apply for new floors until the existing flooring is ready to be installed. So, until the floor installation is considered, either fix or replace the flooring.

The subflooring must be clean before you can put on new tiles or add another type of flooring. Nails, glue, and waste can cause uneven surfaces; thus, these must be removed before mounting. Subfloors must also be swept and cleaned of any dust, which can seem nearly impossible once the tile has been removed.

Clouds of dust can be found, and removing them from your home can take weeks.


Chandler Dust-Free Tile Removal

Where to Locate Chandler Dust-Free Tile Removal Company

Removing tile is a messy operation. Most individuals are unaware of the time, energy, danger, and effort involved in floor removal. DIY tile removal isn’t cost-effective because of the risk of damaging your subfloor or the need to rent disposal units.

Our tile removal service makes use of powerful vacuums to collect all the dust from your house. All of our cleaning equipment has dust-free vacuum ports to keep dust particles out of the air.

Our results lead to a cleaner, healthier home, and the job is carried out more quickly. Contact Kodiak Tile and Stone, or you can fill in the compact form for a direct reply. You can check out customer reviews here, ‘SoTellUs,’ and the BBB reviews for more information.

Fill Out Form
Fill in for a fast response